Combined Air/Communication Hose™

In stock

  • Made of high-quality materials
  • Suitable for use in Nuclear Reactor Vaults
  • Rubberized over-mouldings make it rugged & easy to decontaminate
  • Rated to 125psi (TSSA Registered: CSA B51)
  • Durable construction and secure interconnection
  • Supplies breathing and cooling air as well as a connection for communication headsets – All in One!
  • Intuitive and easy to use design
  • Core Tube is made from FDA approved food grade material
  • A Urethane Jacket ensures product longevity while minimizing friction to reduce drag
  • Can be easily decontaminated with soap and water
Compare

Combined Air/Communications Hoses™ connect disposable and launderable plastic suits to station air headers, such as those used to supply breathing & cooling air in Nuclear Power Generation and Pharmaceutical industries.  

Communication wiring is incorporated into the hose to provide clear, continuous and effective duplex voice communication to the employee in the suit, without additional encumbrance with belt-mounted radios.  Food grade compounds are used for air-breathing supply components to ensure the ongoing safety of the suit wearers.  A tough Urethane Jacket ensures protection against abrasion and snagging on structures commonly found in the workplace and the long life of these products.  The product is supplied with a Hansen® 2RL Male Air Connector, and a parallel electrical connector ensuring alignment and stability while disconnecting the assembly with gloves. 

Standard lengths up to 30 meters (100 feet). Other available sizes:

    • 0.7 meters (2 feet)
    • 1.0 meters (3 feet)
    • 1.2 meters (4 feet)
    • 7.6 meters (25 feet)
    • 15.2 meters (50 feet)
    • 23 meters (75 feet)
    • 30 meters (100 feet)

Additional information

Air Fitting Style (Suit Fittings)

Hansen® 2RL (M to F)

Air Pressure, Working

125psi

Electrical Connector

Female Canon® XLR 3

Air Connection Fitting (Termination)

Internal

Air Flow@ 75psi

>13.2 L/sec (28 SCFM)

Air Connector Material

Hardened Steel & Brass

Housing Material

Nylon

Core Tube Material (Hose Only)

FDA Food Grade Approved, TP

Air Fitting Termination Material

Brass

Other Material (Key Parts Only)

Jacket: Polyurethane

Colour

Other colours available on special order, Red

Outer Diameter

N/A

Inner Diameter

9.5mm (3/8")

Length

Standard lengths: 7.6m, 15m, 30m

Weight

3.85kg (8.5lbs) per 15.2m (50ft) [with connectors]

Design pressure

125psig

Number of Conductors

3

No. of connector pins

3

Release Lever

Nylon

Release Spring

Spring Steel

Recommendations

  • Do not use above rated pressure i.e., 125psi
  • Disconnect hose when not in use (excluding 2ft whips, which can remain connected to the headers) 
  • This product is not to be used below –10°C or above 40°C
  • Clean this product only with soap and water 
  • Do not subject the hoses to petroleum products or distillates 
  • Roll and hang hoses up off the floor when not in use 
  • Connector Release Latches should be replaced regularly as part of a good maintenance program.  
  • Do not stretch hose assemblies

Replacement Parts

  • Release Lever
  • Release Spring

Applications

  • Nuclear, Industrial
  • Radiation Personal Protective Equipment PPE
  • Vault Suit Breathing Air Hose
  • Chemical Plants

Certifications

  • USA FDA Code of Federal Regulations, Title 21 listing
  • NSF 51 listing
  • TSSA Registered: CSA B51
  • Meets requirements of Resolution AP (89) and is acceptable for use in food contact applications within the European Union
  • ISO 9001:2015

Documents

Main Menu

CONTACT US